After a few years in the market our Saturns are growing older, and problems related to bad caps in the stock power supply, or problems with the infamous voltage regulator (prone to fail from the very begining) are commonplace. This can affect the voltage of the CD lens and, of course, the voltage the chips in the mobo are in need of. Recapping or swapping the whole psu can obviously be a solution, but the variety of models existing makes it sometimes hard to find a match.
To solve all this, I designed the ReSaturn PSU, a 12v power supply that works with all Saturn revisions (from VA0 to VA15) either NTSC-J, NTSC-US, or PAL.. You just need a 12v AC/DC adapter with positive centre tip and you’re good to go.
The Saturn had 3 different sorts of PSU:
Type A (GND,GND, 3.3v, 5v, 9v)
Type B (GND,GND, 3.3v, 5v, 9v)
Type C (GND, GND, 5v, 5v, 9v/12v) or (GND, GND, 5v, 5v).
All these combinations are possible with the ReSaturn PSU.
The ReSaturn includes a block connector with +5V that will allow MODE users to plug in the cable for extrajuice straight to the PSU. This has sorted out issues related to crackling sound with the MODE.
Please note that this design follows PCB layout best practice and that the choice of components is tailored to the specific needs of the Saturn. All components are good quality branded ones. When used with a good 12v adapter, this PSU offers a ripple+noise output of around 30mV on the 3.3v and 5v rails under load.
How to order
Price: 32 GBP
Shipping : UK FREE; International tracked and signed 8.5 GBP (EU) 9.5 (Rest of the World).
To order, please use the contact section and let me know the socket you need (either T-shaped for Va0 or rectangular for va1-15), the shipping destination and your paypal address. I will then send an invoice.
Thanks for taking a look!